's Forum Archives - Retro - Classic Bikes

Archive Home >> Retro - Classic Bikes

>>Paging bicyclerepairman<<(5 posts)

>>Paging bicyclerepairman<<girchygirchy
Apr 6, 2003 6:30 PM
Did you find any info in your Sutherland's book on the 3.3.3. Shimano hubs? Someone else replied to my original post, showing an interest. Any help would be appreciated, thanks!

re: &gt;&gt;Paging bicyclerepairman&lt;&lt;bicyclerepairman
Apr 7, 2003 12:06 PM
Sutherland's Handbook for BM has a schematic for disassembly/reassembly of the Shimano 333 hub. Its a 3 speed. Its not compatible with positron shifters. Not much more to say.
You gots a scanner, by any chance?girchygirchy
Apr 7, 2003 1:55 PM
Do you think you could somehow scan in that schematic and put it on here or email me? I'll probably want to take it apart when the time comes. Thanks.

You gots a scanner, by any chance?bicyclerepairman
Apr 8, 2003 6:07 AM
I don't have a scanner...not to drop names, but Ed Coliani is an acquaintance of mine (a co-author of Sutherland's Handbook for Bicycle Mechanics) so I'd feel a little funny doing that anyway. How about Howard Sutherland and ask him to scan and send you the schematic. Or check out your local library...there are othr sources for this info. If you're careful, you can take it apart and reassemble it w/o the schematic SO LONG AS YOU LAY EVERYTHING OUT SO IT GOES BACK TOGETHER IN THE SAME ORDER. Good luck.
You gots a scanner, by any chance?bicyclerepairman
Apr 10, 2003 3:04 PM
I misspelled Ed Colaianni's name in that last post. Sorry, Ed!