|DRIVE TRAIN NOISE||Dougyowougy|
Oct 31, 2003 9:50 AM
|After having a new Ultegra bottom bracket installed in my Talon I now hear |
what sounds like chain rub with no visible contact with the front derailleur.
Two shops have done adjustments but the noise only is heard when I ride.
Can a bottom bracket problem mimic a chain rub sound ?
|re: DRIVE TRAIN NOISE||collectorvelo|
Oct 31, 2003 12:01 PM
|fantom noises are very hard to trace
but if you that the BB out and reinstall it; it would likely go anyway -- if not the axle wrong length and you chain line is bad
another opinion is put on a new chain and see if it comes away --
i always just change parts until I isolate the noise
and it stops
|re: DRIVE TRAIN NOISE||innergel|
Oct 31, 2003 1:41 PM
|Could be the spot where it is rubbing on the big chainring. I had this problem when I was in the 39/14 combo and below. I changed back to a shimano chain from a SRAM and now all is well.|
|Need more info...||BowWow|
Oct 31, 2003 7:15 PM
|Does the noise happen in either/both chainrings? every gear? only when crosschaining (small ring/small cog, big ring/big cog)? pedaling backwards? coasting? Was the old BB an ultegra? same size? for sure?|| |