RoadBikeReview.com's Forum Archives - General


Archive Home >> General(1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 )


Ergolever rebuild(6 posts)

Ergolever rebuildfeathers mcgraw
Mar 27, 2003 1:04 PM
I'm contemplating helping a friend rebuild his ergo levers (record 10). It's missing shifts. Does anyone have any experience with this? Is it possible to just follow Lennard Zinn's instructions? Good idea? Dumb idea?
Depends ?MR_GRUMPY
Mar 27, 2003 1:18 PM
Can you overhaul a Shimano Dura Ace bottom bracket without screwing it up ? When I say overhaul, I mean taking out all the needle bearings, and cleaning them.
re: Ergolever rebuildtazdag
Mar 27, 2003 1:30 PM
I've done it a couple of times, once to upgrade fro 8 to 9 speed, and another time to replace the G spring (it looks like a "g"). It's not too diificult. I used the directions from the campyonly website and a schematic from the Campagnolo website (Tech info, spare parts) to visualize everything.
http://www.campagnolo.com/techinfo.php?did=c
http://www.campyonly.com/howto/ergo_rebuild.html
re: Ergolever rebuilddavidxy
Mar 27, 2003 4:05 PM
I rebuilt/upgraded my 2001 Chorus 9 speed Ergos to 10-speed. You should go to Branfordbike and get the proper manual.
Go to the COMPONENTS boardKerry
Mar 27, 2003 4:46 PM
There's a discussion on this topic with a lot more data. My point made from earlier in the week.
Go to the COMPONENTS boardfeathers mcgraw
Mar 27, 2003 8:10 PM
Thanks. We were aware of that thread, and tonight we flushed it with prolink. Worked like a charm. Thanks.