RoadBikeReview.com's Forum Archives - General


Archive Home >> General(1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 )


Oversized handlebar(4 posts)

Oversized handlebarWild Bill
Dec 27, 2001 4:50 AM
I have the 3ttt ZeppXL handlebar and stem. I also have a Flight Deck Computer.
Is there a larger mounting bracket for my computer?
I also have a Deda Clip-one aero bar.
Is there a different mounting clip for it?
How do you mount anything on this set up?
Sounds silly, but a real problem.
re: Oversized handlebarDave Hickey
Dec 27, 2001 9:10 AM
I'm using a Specialized team computer with a Cinelli Solida oversize bar. I used a zip tie through the holes on the bracket. Put the zip tie through the holes where the screw normally goes. It works fine.
re: Oversized handlebarTrekMan
Dec 27, 2001 9:25 AM
I'm in the same boat my self. Shimano don't do oversized brackets yet (I think), so you're going to have to use a zip tie instead of the screw. I use this on my Deda Magic bar. As for the Clip-One, you're going to have to get a new Clip-One oversized.
Deda Clip-One bar come in two clamp sizesTig
Dec 27, 2001 10:54 AM
If you just bought the Clip-One aero bar with the standard 26 mm clamp, you should return it for the 31.8 mm clamp model. If you are trying to use an older Deda on this new setup, you'll have to check with Deda or your LBS to see if they sell just the clamp. I doubt they do, but it's cheaper than buying a whole new bar.

BTW, if you've already used the Clip-One for a while, how do you like it? Have you used other aero bars to compare it to?