RoadBikeReview.com's Forum Archives - General


Archive Home >> General(1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 )


Cycle computer for Schwinn Fastback?(4 posts)

Cycle computer for Schwinn Fastback?Todd
Oct 16, 2001 4:59 PM
I bought a Performance computer for my Fastback, but the clearance is too tight between the fork leg and spokes to install it. Any suggestions on a brand that'll work are greatly appreciated.
Is the sensor on the front or back of the fork leg? NMvanzutas
Oct 16, 2001 5:23 PM
Shouldn't be a problem...Wannabe
Oct 17, 2001 6:39 AM
vanzutas is right, make sure the sensor is not mounted to the inside of the fork. There is plenty of clearance between the fork and the spokes for the band holding the sensor.

On my fastback the sensor is mounted behind the fork.

Andy - Wannabe
Thanks, I'll try remounting it(nm)Todd
Oct 17, 2001 2:52 PM
nm