RoadBikeReview.com's Forum Archives - General


Archive Home >> General(1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 )


Shimano Flight deck(3 posts)

Shimano Flight deckMRoger
Sep 10, 2001 9:24 AM
I have the flight deck all hooked up. The speed sensors work and the buttons work on the grips (r&l) But... the gear indicator doesn't move. I set up the gears in the computer. I took out the sensors to make sure they are making contact in the grips and they are from what I can see. Any suggestions?? its a 6501 head unit with Ultegra shifters from a 2001 Cannondale R1000 thanks
wiring harnessnova
Sep 10, 2001 12:16 PM
There are multiple wiring harness for the flight deck computer. What model harness do you have? Check the Shimano website to be sure that you have the correct harness for your setup:

http://www.shimanocycling.com/computer/chart.asp
re: Shimano Flight deckec velo
Sep 10, 2001 4:35 PM
I had to put some folded up paper underneath the sensor built into the hood to push it out and make good contact with the sensor on the harness. A friend of mine just licked the sensors and then his worked.