RoadBikeReview.com's Forum Archives - Components


Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )


Any tips on converting Campy ergo 9s to 10-speed?(9 posts)

Any tips on converting Campy ergo 9s to 10-speed?bikeridah
Oct 24, 2003 12:55 PM
I've ordered the conversion cog for the right shifter, now I need some instructions/advice on how to install it. Anyone with experience here?
re: Any tips on converting Campy ergo 9s to 10-speed?flakey
Oct 24, 2003 4:07 PM
this may help you
re: Any tips on converting Campy ergo 9s to 10-speed?flakey
Oct 24, 2003 4:12 PM
sorry, try this.

http://www.campyonly.com/howto/ergo_rebuild.html
re: Any tips on converting Campy ergo 9s to 10-speed?mackgoo
Oct 25, 2003 12:51 PM
Campyonly was a good source, but I think the tech article at Vello news was the best at explaining it.
Remember when that Velonews article was posted?bikeridah
Oct 26, 2003 11:35 AM
Campyonly webpage isn't very informative. Do you recall when the Velonews article was posted?
Remember when that Velonews article was posted?mackgoo
Oct 30, 2003 7:38 AM
Go to thier web site and look in the tech articles you should find it pretty easily.
Remember when that Velonews article was posted?mackgoo
Oct 30, 2003 7:40 AM
http://www.velonews.com/tech/rev/levers.html
Try Campagnolo and Branford bike web sitesbimini
Oct 27, 2003 6:56 AM
The Campagnolo site has exploded parts diagrams that show all the parts, part numbers and how they go together.
http://www.campagnolo.com/techinfo.php?did=c

The Bradford Bike site has info also. I was able to do a 9 to 8 speed Convertion with this info. Getting the main spring back in was a little tricky and took some patience. Also make certain it is put in with the correct side up. (I made this mistake, the shifter worked but would ghost shift under load until I corrected it)

Bradford also sells an instruction sheet. I got by without it, but maybe I could of got it right the first time with the instructions.
http://www.branfordbike.com/campy/campy.html
I had better success at just buying the R. ergo unit! nmLeroy
Oct 27, 2003 7:39 AM