RoadBikeReview.com's Forum Archives - Components


Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )


Any idea where I can get a ErgoBrain cadence magnet?(8 posts)

Any idea where I can get a ErgoBrain cadence magnet?Bonked
May 14, 2003 11:28 AM
Or what I can do to replicate one? I have looked at a few shops and haven't been able to find anything.

thanks!
re: Any idea where I can get a ErgoBrain cadence magnet?gschiener
May 14, 2003 5:32 PM
You can find it here...http://www.branfordbike.com/computer/comp7.html#item3
re: Any idea where I can get a ErgoBrain cadence magnet?Bonked
May 15, 2003 9:47 AM
I could have sworn I checked branford bike, but thanks. if the lead below doesn't work i'll probably go with branford.

thanks again
re: Any idea where I can get a ErgoBrain cadence magnet?mackgoo
May 14, 2003 10:50 PM
Which one do you need? If you have steel spindles I have an extra one.
re: Any idea where I can get a ErgoBrain cadence magnet?Bonked
May 15, 2003 9:46 AM
I wasn't aware that there were multiple ones, but I have Time pedals with steel spindles...your extra one would be great! My email is mmquest@att.net.

Thanks!
Try one of theseB2
May 16, 2003 5:03 AM
http://www.indigo.com/magnets/gphmgnts/rare-earth-magnets.html

They're cheap and you won't loose it. The Campy ones are a very small diameter made to fit in the hole in the profit pedal spindle. My speedplays had a much larger diameter hole in the spindle and I lost the Campy magnet as a result. (get one the same diameter as the pedal spindle itself)

Bryan
Thanks...those are a <i>bit</i> cheaper! n/mBonked
May 16, 2003 9:44 AM
Thanks...those are a <i>bit</i> cheaper! n/mmackgoo
May 16, 2003 5:15 PM
I e mailed last night. It goes in the mail when I get your adress. That is what I have to offer one of the "pill" types. I don't try to fit it in the hole just on the edge.