's Forum Archives - Components

Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )

Ergobrain installation problems: solved!(5 posts)

Ergobrain installation problems: solved!PaulCL
Jan 19, 2003 10:12 AM
I posted a couple of weeks ago about my problem with no cadence

I sent the unit back to Col. Cyclist for a replacement. My replacement works perfectly. Apparently, my previous unit's cadence sensor was bad. All it took was time to solve...and since there is 6" of snow and the temp is in the single digits...I'm not riding anyway.

Thanks. Paul
good to hearweiwentg
Jan 19, 2003 8:00 PM
about the computer, not the temps. our temperatures are in the 10s, and no one's riding, either.
current temp: 36PaulCL
Jan 20, 2003 6:33 AM
Of course, there's still 4" of the white stuff on the ground. It may be time to take the EB out for its' maiden voyage.

From looking at the instruction book, I think I'm gonna regret not getting a PhD in electrical engineering. Geez! There's a lot to learn...but it will be fun. Thanks for the input recently. paul
current temp: 36legs
Jan 20, 2003 10:46 AM
our temp was mid seventies.. the first race of the season is in two weeks in santa barbara.. already have thousands of miles in my legs...
I love California.
current temp: 19PaulCL
Jan 21, 2003 9:54 AM
I hate the temp in this area. Now 19 degrees still with snow on the ground.

Unlike you, I have tens of miles in my legs. I have ridden outside a grand total of once. Yesterday. 15 miles.

I have done about four roller sessions and four spinning sessions since the first of the year. Also, I have lifted weights 2-3x per week. Still can't keep that weight off.

By the way...our first race of the year is always the last weekend in Febuary. A road race in the 20 degree weather with icy roads...lots of fun. I think I'll take a pass this year.