's Forum Archives - Components

Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )

look pp396(4 posts)

look pp396tav
Aug 4, 2002 10:59 AM
On the pp396 you can set the float (0,3,6,9°), with red cleats you have at 0°,3°,6° and 9° float always the same float (from the cleat itself) Am i correct here.
So what about black cleats , when i set it on 0°its no float on 3° (3° float)....?
Is the float ajustment only there for the black cleats.
re: look pp396Velocipedio
Aug 4, 2002 11:35 AM
I'm not quite sure what you mean... However...

Using the red cleats, you can set the float on the PP396s to 3,6 and 9 degrees. With the black cleats, you get no float at all, no matter what hoe you set the flat dial.
re: look pp396tav
Aug 4, 2002 11:37 AM
When i use the red cleats and the setting of the float is at 0° the red cleat is still with a lot of float so why they call it 0°.
re: look pp396paul3d
Aug 4, 2002 2:09 PM
At 0 with the red cleat, there is no movement but there will spring tension when the cleat is slightly moved from side to side. With the Black it takes as much force as needed to release. Not sure if I explained it right but thats my story and I'm sticking to it.