's Forum Archives - Components

Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )

Campy - what do I have?(9 posts)

Campy - what do I have?TFerguson
Jul 9, 2002 8:42 AM
I believe this to be a Nuovo Record 7 speed hub. Is this correct? How can I tell? Is there a site with hub model info? I've tried campyonly.
I bought the set, repacked and polished and am building them with a pair of Omega Strada XL rims.
re: Campy - what do I have?boneman
Jul 9, 2002 8:59 AM
Looks like C-Record to me....
re: Campy - what do I have?alansutton
Jul 9, 2002 9:03 AM
Looks like c-record to me
Jul 9, 2002 4:43 PM
The elongated dust cover/sealing cone is the give away. The number of cogs it can take is a function of the axle length - 126 mm over lock nut spacing = 7 speed.
Are you sure it isn't Croce d'aune? nm.jaybird
Jul 10, 2002 4:44 AM
Are you sure it isn't Croce d'aune? nm.nelson
Jul 10, 2002 7:47 AM
Croce d'aune did not have the countersunk spoke holes or the same dust cover as this C-Record,
Face to face is 130mm? Does dust cover come off?TFerguson
Jul 10, 2002 10:06 AM
Did they make a 130 hub or has a spacer been added?

Also, does the left side dust cover come off like the ones on the front do? The front ones just slide off. The rear does not and I am don't want to force it.
Dust cap removalKerry
Jul 10, 2002 5:42 PM
Use a wide bladed screwdriver or (better) the thin blades of a cone wrench and just work your way around with a twisting motion.

To get the wider spacing, you substitute a longer axle and additional spacer. The hub is not "130 mm" it is the axle and spacer combo.
Thanks all. TF (nm)TFerguson
Jul 10, 2002 8:16 AM