RoadBikeReview.com's Forum Archives - Components


Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )


Flight Deck problems(3 posts)

Flight Deck problemsYatesie
Jun 2, 2002 3:47 PM
I have a wireless Flight Deck that is not registering cassette shifts. It always stays on the largest cog. It was fine. All other functions work properly. Has anyone else had this problem?
re: Flight Deck problemsboneman
Jun 3, 2002 1:05 AM
Try removing the shift button assembly, RH, from the STI levers, cleaning the contacts gently per the instructions and then remounting.
re: Flight Deck problemsDirk Lenart
Jun 6, 2002 7:20 AM
I agree with boneman. But I would like to add something very important.
Dirt is not the problem. You have to bend the thing which is in the lever a bit to the outside. When you screw the plate back on, you'll have to watch your computer and alternate between the screws. You'll notice that at first the computer is not registering. But at a certain point (torque of the tiny screws) you will get a registering. Now stop! Because when you continue the screw you will lose the contact, strange as it may sound.
I've had this problem with all my Flightdecks. This technique is the cure, believe me.
Succes