RoadBikeReview.com's Forum Archives - Components


Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )


Can't get Flight Deck to work(3 posts)

Can't get Flight Deck to workkburney
May 28, 2002 5:55 PM
I have a new Dura-Ace equipped Litespeed and a wireless Flight Deck on it. I have gone through the set up of the FD and followed the directions, but the buttons on the brake levers won't work and the chain ring and sprocket indicators don't work. All of the other functions seem to work and the unit responds when pressing the buttons on the body itself.

Any ideas?
re: Can't get Flight Deck to workAkirasho
May 29, 2002 12:40 AM
I'm unfamiliar with Dura Ace Flight Deck Compatible levers (I've got first and second generation Ultegra) but it sounds as though you've got a bad interface...

Check to make sure that you indeed do have Flight Deck compatible levers and check to make sure that the sensor harness interface and wiring are intact. It's possible that you got a bad set of levers... or the sensors have been otherwised damaged (some early users of first generation Ultegra Flight Deck compatible levers inadvertently tore out the sensor wires thinking that they were loose packing wires inside the housings).

We abide.

Remain In Light.
re: Can't get Flight Deck to workboneman
May 29, 2002 3:29 AM
Try remounting the lever interfaces into the lever, and make sure that they're properly seated.