's Forum Archives - Components

Archive Home >> Components(1 2 3 4 5 6 7 8 9 10 )

Need info from anyone who also rebuilt Ergopower(7 posts)

Need info from anyone who also rebuilt ErgopowerPina
Oct 10, 2001 12:26 AM
Please react! Thanks!
re: Need info from anyone who also rebuilt ErgopowerJack S
Oct 10, 2001 4:49 AM
re: Need info from anyone who also rebuilt Ergopowermackgoo
Oct 10, 2001 4:59 AM
If your asking for info on rebuilding Ergo's try
Consider this reply a reactionCliff Oates
Oct 10, 2001 5:37 AM
Try asking a real question. You could also try picking up a copy of Zinn's Road Bike maintenance book as it has a section on rebuilding ergo levers. As noted above, the Campy Only web site has a discussion on rebuilding ergo levers here.
re: Need info from anyone who also rebuilt ErgopowerPINA
Oct 10, 2001 7:38 AM
This is my question (I first wanted to know if there were others who did it):
I have both the Campagnolo drawing of the Ergopower and the official Campa video with instructions, BUT...
the problem is that in the video, they show a small gold coloured ring that fits exactly in the cam's bottom part (EC-AT061 Record model), but in my Daytona Ergopower there is no gold coloured ring and of course I got the rings mixed up. I rebuilt the EP with a small ring in the cam. This one seems to be smaller then the one in the video, but there is no wider ring in my EP.

Did you experience the same thing? Do you remember if this part fit exactly into the cam?

Is there a way to tell which ring is which if you happen to mix them up? The drawings are not to scale and I can not tell from any drawing I know, which ring is which.
re: Need info from anyone who also rebuilt ErgopowerCliff Oates
Oct 10, 2001 8:56 AM
I have not rebuilt an ergo lever.

I looked at the exploded drawings on the Campy web site, my Quality catalog, and the Zinn book and I see the part you're referencing. From the Quality catalog, it looks like there is a bearing, a spacer, and another bearing. On Record and Chorus models, a washer sits between the second bearing and the index gear, while this is not present on Daytona and lower models. My 2001 Quality catalog only shows exploded diagrams and parts lists for 2000 and prior model year levers.

There is at least one and probably two shop owners who make a living rebuilding Campy levers over in the newsgroup. You may want to ask your question there.
Oct 16, 2001 12:40 PM
Peter (si parle camapgnolo) on will be able to help you. he also has a website at